The AS500 is a rugged, long‑standby GPS tracker designed for demanding asset tracking applications and is Plaspy compatible out of the box. Built for construction sites, mining, logistics yards and other harsh environments, the AS500 combines IP67/IP69K mechanical protection, a low‑power architecture and LTE Cat‑M1 cellular connectivity to deliver reliable location and telemetry where long battery life and durability matter.
The AS500 integrates 99‑channel GNSS (GPS + GLONASS), Wi‑Fi scanning and Bluetooth Low Energy 5.1 for mixed indoor/outdoor positioning and remote sensor monitoring. With flexible data transport (UDP, TCP, MQTT), on‑device queueing and support for Nano SIM or eSIM, the AS500 is engineered to feed Plaspy with high‑quality location, motion and sensor data for real‑time tracking, fleet management and anti‑theft workflows.
Key Highlights
- Long battery life: up to eight years on three AA Li‑FeS2 cells (3,000 mAh) with daily reporting—ideal for unpowered assets.
- Plaspy compatible: sends telemetry via UDP/TCP/MQTT for seamless integration with Plaspy dashboards and alerts.
- Rugged enclosure: IP67 and IP69K rating plus MIL‑STD‑810H resistance to vibration, shock, salt fog and solar radiation.
- Accurate positioning: 99‑channel GNSS (GPS & GLONASS) with ~2.5 m CEP typical accuracy for reliable GPS tracking.
- Indoor/location augmentation: Wi‑Fi scanning and BLE 5.1 long range supported for improved indoor detection and Bluetooth sensors.
- Smart power management: deep sleep current <25 μA and intelligent reporting to maximize standby time.
- Local data resiliency: 16 Mbit internal flash (~10,000 queue entries) stores events during outages or transit.
How It Works with Plaspy
The AS500 streams and buffers location and sensor data using standard protocols so Plaspy can deliver real‑time tracking, event alerts and historical telemetry. Configure reporting intervals, geofence rules and event thresholds in Plaspy while the device prioritizes power efficiency and reliable delivery.
- Real‑time location and telemetry updates delivered to Plaspy via UDP, TCP or MQTT.
- Motion, tamper and door‑open events reported to trigger Plaspy alerts for anti‑theft and security workflows.
- Wi‑Fi scanning and BLE sensor data (BLE 5.1) for indoor positioning and remote sensor monitoring through Plaspy dashboards.
- Queued local storage (≈10,000 entries) ensures no data loss during connectivity gaps; Plaspy ingests queued data when the link restores.
- ADM device management and UART support enable remote configuration, firmware updates and on‑site maintenance tied to Plaspy provisioning processes.
Technical Overview
| Connectivity | LTE Cat.M1 (regional variants: AS500‑LE for EMEA/APAC, AS500‑MG global, AS500‑MX North America); data via UDP/IP, TCP/IP or MQTT; Nano SIM and eSIM options; embedded cellular antenna |
|---|---|
| Bands / Variants | Regional Cat.M1 variants available—specific carrier bands depend on chosen variant and market (AS500‑LE, AS500‑MG, AS500‑MX) |
| Power & Battery | Three AA Li‑FeS2 batteries (3,000 mAh), high‑efficiency power saving; up to eight years at daily reporting; deep‑sleep current <25 μA |
| Interfaces | Tamper and door‑open detection support; BLE sensor compatibility (BL1 series and others); UART for configuration/firmware; mounting via screws/bolts or optional magnet |
| GNSS | 99‑channel GPS + GLONASS receiver; typical location accuracy ≈2.5 m CEP |
| Bluetooth | Bluetooth Low Energy 5.1 (long range) for sensor telemetry and proximity detection |
| Local Storage | 16 Mbit internal flash, approximately 10,000 queue entries for offline buffering |
| Remote Management | ATrack Device Management (ADM) support and UART cable for device configuration and firmware updates |
| Environmental & Durability | IP67 & IP69K housing; MIL‑STD‑810H vibration, shock, salt fog, solar radiation and low pressure testing; operating −40 °C to 60 °C, 95% RH @50 °C non‑condensing |
| Form Factor | 118 × 65 × 28 mm; ≈171 g with batteries; compact asset tracker for outdoor/indoor mounting |
| Certifications | FCC, IC, PTCRB, CE, RoHS; common carrier approvals (AT&T, Verizon) for North American variants |
Use Cases
- Container and trailer tracking — long battery life and rugged enclosure for long‑term, unpowered assets.
- Construction and mining asset monitoring — withstands harsh washdowns, vibration and extreme environments.
- Generator and equipment location & usage monitoring — motion and tamper events help detect unauthorized movement.
- Mixed indoor/outdoor asset tracking — GNSS outdoors with Wi‑Fi scanning and BLE sensors indoors for continuous coverage.
- Logistics yard and fleet adjuncts — buffer telemetry during connectivity gaps and report to Plaspy when online for fleet management insights.
Why Choose This Tracker with Plaspy
Pairing the AS500 with Plaspy delivers a dependable, low‑maintenance GPS tracker solution for operators who need long battery life, rugged hardware and flexible telemetry. The device’s LTE Cat.M1 connectivity and support for UDP/TCP/MQTT let Plaspy ingest location, motion and sensor data in real time while the local queueing and deep‑sleep modes ensure continuity and exceptional standby life. BLE and Wi‑Fi scanning extend Plaspy’s visibility indoors, and tamper/door events empower anti‑theft and security workflows.
For fleet management and telemetry programs that require scalable, Plaspy compatible trackers—especially where assets are unpowered or exposed to harsh conditions—the AS500 offers a compact, certified and field‑proven option. Its remote management support (ADM and UART), carrier approvals and regional variants simplify deployment and maintenance, and its sensor integrations make it easy to build richer monitoring and operational rules in Plaspy (including complementary workflows involving ignition or immobilizer systems via Plaspy integrations where applicable).
Set Up AS500
To set t4xQV8V2 ROg you need to configure as follows. With the following script
- Set ACC event
SjtVP9UARFe
juIt13o4Ucavtp43BqwcyCScIHlY
csm8LCb7RmgyKjhHWGdaqCyWIPaF
MwrCj6YuuSTLl - Set time interval to 60 seconds
2ZAQdtiguUdYZY4Jzq - Set to binary mode
gnU8bngjqIveTOAUP - Set the GPRS server
DpW2ue1cOovTT9XuEPMjDLoCPDVcjnDUJB58hizDcRYP4eKjghthDMWjA3wrvFajB5zqhy8xo
To check device status F9GT634Cz