AX11 OBDII Vehicle Tracker
The AX11 is a plug-and-play OBDII GPS tracker designed for fast integration with telematics platforms like Plaspy. Built for fleet management, usage-based insurance, car rental operations and teenage driver monitoring, the AX11 combines LTE cellular connectivity, integrated GNSS positioning and rich vehicle-bus telemetry to deliver reliable, Plaspy compatible real-time tracking and reporting.
Engineered for quick installation via the SAE J1962 Type B OBDII port, the AX11 provides robust data capture from passenger cars to heavy-duty trucks. Its carrier-ready LTE hardware, internal GNSS and optional Bluetooth Low Energy support make it an ideal GPS tracker for scalable fleet deployments and vehicle-centric IoT use cases on Plaspy.
Key Highlights
- Plug-and-play OBDII installation (SAE J1962 Type B) for rapid deployment across vehicle fleets.
- LTE connectivity with Cat.1 and Cat.M1 module variants plus TCP/UDP and SMS transport for reliable real-time tracking.
- Integrated GPS/GLONASS 99-channel GNSS engine with −167 dBm tracking sensitivity and typical 2.5 m CEP (50%) location accuracy.
- Wide vehicle-bus protocol support (OBDII, SAE J1939, J1708/J1587, ISO 15765-4 CAN, ISO 14230-4, ISO 9141-2, SAE J1850) to unlock telemetry such as fuel and engine status where available.
- Internal 64 Mbit flash for local log storage (~120,000 logs) and very low deep-sleep current (around 1.7 mA @12V on some variants) for minimal draw on vehicle batteries.
- Built-in 3-axis ±16 g accelerometer and 3-axis gyroscope (±2000 dps) for driving-behavior events, harsh-braking and collision detection analytics.
- Rugged design meeting MIL-STD-810G/SAE J1455 with operating range −40 to +70°C and flame-retardant ABS+PC enclosure.
- Device management features: internal NanoSIM, ADM/SMS/USB configuration and firmware updates via ADM, FOTA or USB.
How It Works with Plaspy
When paired with Plaspy, the AX11 streams vehicle location and telematics to the platform using its cellular data link (TCP/UDP) or falls back to SMS where needed. Plaspy ingests GNSS fixes, OBD/CAN telemetry and sensor events to provide live maps, alerts and historical reports for fleet managers and insurers.
- Real-time location and telemetry updates over LTE (Cat.1 / Cat.M1) to Plaspy for live tracking and geofencing alerts.
- Vehicle-bus data capture (OBDII / CAN / J1939 / J1708) enabling fuel monitoring, engine diagnostic parameters and ignition status where available on the vehicle.
- Local log storage (internal 64 Mbit flash) with batch upload to Plaspy for reconnect scenarios or intermittent coverage.
- Driving behavior events (accelerometer/gyroscope) transmitted to Plaspy for harsh event scoring, driver coaching and safety reports.
- Optional Bluetooth Low Energy support for BLE sensors (TPMS and other peripherals) to extend Plaspy telemetry with wireless sensor data.
Technical Overview
| Connectivity | LTE cellular (variants: LTE Cat.1 and Cat.M1); data transport via UDP/IP, TCP/IP and SMS |
|---|---|
| Bands / Carrier Readiness | Carrier-certified variants for AT&T, Verizon, Sprint, TELUS and module-certified carriers (NTT Docomo, KDDI, Telstra); frequency band variants available for different markets |
| Power & Battery | Vehicle 12V/24V power; deep sleep ~1.7 mA @12V on some variants; internal backup battery 3.7V 90 mAh for brief power-loss scenarios |
| Interfaces | SAE J1962 Type B OBDII connector (plug-and-play); mini USB PC/accessory interface; optional adapters and accessory interfaces (J1939/J1708 adapters, RS232, 1-Wire, OBD extension cables) |
| GNSS | Integrated GPS/GLONASS, 99-channel engine, −167 dBm tracking sensitivity, typical 2.5 m CEP (50%) |
| Bluetooth | Optional Bluetooth Low Energy v4.2 for IoT peripherals and TPMS sensors |
| Remote Management | ADM/SMS/USB configuration and firmware updates via ADM, FOTA or USB cable |
| Form Factor & Durability | OBDII dongle style: 84 × 52 × 25 mm, 80 g; flame-retardant ABS+PC enclosure; rated to MIL-STD-810G/SAE J1455; operating −40 to +70°C (without battery) |
Use Cases
- Fleet management: live vehicle tracking, route replay, scheduling and telemetry for commercial fleets.
- Usage-based insurance and driver scoring: collect OBD/CAN data plus accelerometer/gyroscope events to feed safe-driving models.
- Car rental and shared mobility: plug-and-play installation for mileage, tamper alerts and location reporting without complex wiring.
- Teenage driver monitoring and parental alerts: speed, harsh events and location reporting to help improve driving behavior.
- Heavy-duty truck telemetry: use optional J1939/J1708 adapters and OEM CAN reads to collect engine and fuel parameters for trucks and vocational fleets.
Why Choose This Tracker with Plaspy
The AX11 is a Plaspy compatible GPS tracker that balances fast deployment with rich telemetry. Its OBDII form factor eliminates complex installation, while industry-grade GNSS and LTE connectivity ensure accurate real-time tracking and reliable data uploads. Built-in sensors and broad vehicle-bus protocol support make it a strong fit for fleet management, telemetry-driven insurance programs and rental operations.
Choose the AX11 with Plaspy to gain scalable, remote-managed tracking that supports Bluetooth sensors, comprehensive OBD/CAN data capture (fuel and ignition parameters where available), local logging for intermittent coverage and FOTA-driven lifecycle updates. The combination delivers trusted location awareness, anti-theft recovery capabilities, driving-behavior analytics and the telemetry foundation you need to optimize operations.
Set Up AX11
To set xGpJQfLG 8Qc you need to configure as follows. With the following script
- Set ACC event
Dd2XDA7xoHl
NzoGpTkyXgQl7CBNGYQ1v9k7YX5V
eKMVXyENCdSAUBpovhSNGZ9yhX6W
lXfntmSjGdGw1 - Set time interval to 60 seconds
Xwe16s6XbdcHmm75HF - Set to binary mode
cOzpILaALw5lfphxM - Set the GPRS server
FXTwgENoMEb0J6qxGNJm6LW8MVsxmZYT5Ur8LOn2oGJHL60XJxd5y9XCdTD7L618qMcc17nUB
To check device status jKNTaFKWD