The G900LS is a professional 4G hard-wiring GPS tracker designed for vehicle owners and fleet operators who need precise, reliable positioning and remote control. Plaspy compatible out of the box, the G900LS delivers real-time tracking, rich telemetry, and configurable alarms so operations teams and dispatchers see vehicle location, ignition status, and critical events on the Plaspy web platform or mobile app.
Built as a global LTE/GSM device with both 4-pin and 8-pin installation options, the G900LS supports high-accuracy GPS and a robust set of vehicle inputs and remote commands. Whether your priority is fleet management, anti-theft protection, or rental and leasing oversight, this tracker integrates with Plaspy to give you automated alerts, historical reports, and remote immobilizer control where supported.
Key Highlights
- Plaspy compatible for easy integration into existing fleet management workflows and real-time tracking dashboards.
- Global 4G LTE coverage with fallback to GSM/GPRS for consistent connectivity across regions.
- High-accuracy GNSS: 66-channel receiver with under 5 m CEP location accuracy for precise route and asset monitoring.
- Multiple vehicle alarms and telemetry: movement, ignition (ACC) on/off, speed alerts, power-cut detection, and angle-change updates.
- Built-in 150mAh backup battery to support power-cut alarms and short autonomous operation after mains loss.
- Optional relay control enables remote fuel or power cut for vehicle immobilization and theft response.
- Flexible wiring: available in 4-pin and 8-pin versions to match diverse vehicle harnesses and installation scenarios.
How It Works with Plaspy
When connected to Plaspy, the G900LS streams location and telemetry over LTE/GPRS using TCP/IP. The tracker's protocol support and configurable upload intervals allow Plaspy to receive frequent, accurate position updates and event-driven alarms. Plaspy then correlates that data with geofences, speed rules, and scheduled reports to provide actionable insights for fleet managers and security teams.
- Real-time location and telemetry updates via LTE/GPRS for live tracking on Plaspy maps.
- Ignition (ACC) status, speed detection, and movement alarms feed into Plaspy rules and alerts.
- Power-cut alarm and backup battery events are reported so dispatch can react to tamper or power-loss incidents.
- Remote immobilizer/relay control can be issued from Plaspy (platform-supported commands) to disable fuel or power if required.
- Configurable upload intervals and alarm enable/disable commands let Plaspy balance reporting frequency and data usage for each device.
Technical Overview
| Connectivity | LTE / GSM / GPRS (4G global version) |
|---|---|
| Bands | LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28/B66; LTE-TDD: B34/B38/B39/B40/B41; GSM: 850/900/1800/1900 MHz |
| Power & Battery | Operating voltage 9–90 VDC; built-in 150 mAh (3.7V Li-Polymer) backup battery for power-cut alerts and limited autonomous operation |
| Protocols | GPRS Class 12 TCP/IP; GT06 series protocol for backend integration |
| Interfaces | 4-pin and 8-pin wiring harness variants; ACC/ignition detection; power-cut detection; optional relay for remote fuel or power cut control |
| GNSS | 66-channel GPS receiver; -165 dBm tracking sensitivity; location accuracy < 5 m CEP; TTFF: <35s cold, <1s hot (open sky) |
| Remote Management | SMS and platform commands: APN/server config, GPS queries, status/version checks, configurable upload intervals, alarm enable/disable, remote relay control |
| Operating Conditions | Operating temperature -20°C to +70°C; standby/working consumption between 5 mA and 50 mA |
| Form Factor | Hard-wiring car GPS tracker, compact for discreet vehicle installation |
Use Cases
- Fleet management — continuous real-time tracking and telemetry for route optimization, driver monitoring, and compliance reporting.
- Anti-theft and immobilization — movement and power-cut alarms combined with remote relay control to secure stolen or tampered vehicles.
- Logistics and delivery — accurate, sub-5-meter positioning and event logs to validate deliveries and manage late transfers.
- Rental and leasing oversight — ignition and usage monitoring, configurable upload intervals, and remote disable options for contract enforcement.
- Vehicle monitoring and recovery — speed, ACC, and angle-change alerts enable rapid response and improved recovery outcomes after incidents.
Why Choose This Tracker with Plaspy
The G900LS paired with Plaspy offers a reliable, scalable solution for organizations that need accurate 4G positioning, robust telemetry, and remote control capabilities. Its broad LTE/GSM band support ensures wide geographic coverage, while the GT06-compatible protocol and GPRS/TCP/IP transport simplify backend integration into Plaspy. For fleet managers and security teams, the combination delivers timely alarms (ignition, movement, power cut), configurable reporting intervals to manage data usage, and optional relay-based immobilization for theft response — all accessible through Plaspy’s maps, alerts, and reporting tools. Choose this Plaspy compatible GPS tracker when you need professional-grade vehicle monitoring, high-accuracy location data, and practical remote management in one integrated package.
Set Up G900LS
Use with a tracker
-
Set the Operator APN
CountryCarrierAPNinternet.comcel.com.coUserCOMCELWEBPasswordCOMCELWEB
- Check your tracker clock setup is set UTC-0 or GMT. (The most trackers come from the factory on UTC.)
- For most devices you should use IMEI (International Mobile Equipment Identity) number as unique identifier. However, some devices have vendor specific unique identifier, for example TK-103 devices use 11-digit identifier.
-
Set Up the IP and port on your tracker: (automatic detect tracker's protocol.)
IP 54.85.159.138 Port 8888 - Add on your Account on devices with the IMEI or unique ID.